Here's a general guide on how to replace it. Always disconnect the negative battery terminal before starting any electrical work.
1. Accessing the Glove Compartment:
* Remove the glove compartment: Open the glove compartment fully. There are usually screws or clips holding it in place. You may need to carefully pry it loose with a flat-head screwdriver or trim tool, working along the edges. Consult your owner's manual or search online for a specific diagram for your Suburban's glove box removal.
2. Locating the Blower Motor Resistor:
* Once the glove box is out, you should see the blower motor assembly. The resistor is usually a small, black rectangular component attached to or near the blower motor housing. It might be secured with screws or clips. Sometimes it's mounted on a bracket or directly on the blower motor itself. It may have multiple wires connected to it.
3. Removing the Old Resistor:
* Unplug the electrical connectors: Carefully disconnect the electrical connectors from the resistor. Take note of their positions for reassembly.
* Remove the mounting screws or clips: Once unplugged, carefully remove the screws or clips holding the resistor in place.
4. Installing the New Resistor:
* Install the new resistor: Carefully install the new resistor, ensuring it is securely fastened with the screws or clips.
* Reconnect the electrical connectors: Reconnect the electrical connectors, making sure they are securely plugged in. Refer to how they were connected before removal.
5. Reassembling:
* Reinstall the glove compartment: Carefully put the glove compartment back in place, securing it with the screws or clips.
6. Test:
* Reconnect the battery: Reconnect the negative battery terminal.
* Test the blower motor: Turn on the ignition and test all the blower motor speeds. If all speeds work correctly, the replacement was successful.
Important Considerations:
* Year and Trim Level Variations: The exact location and access method might vary slightly depending on the specific year and trim level of your 2001 Chevy Suburban. Searching online for "2001 Chevy Suburban blower motor resistor replacement" along with your specific trim level (e.g., LS, LT, etc.) might yield more precise instructions and diagrams.
* Repair Manuals: A repair manual specific to your vehicle is highly recommended. These manuals provide detailed diagrams and instructions that can greatly simplify the process.
* Safety: Always disconnect the negative battery terminal before working on any electrical components. Be careful not to damage any wires or components during the removal and installation process.
If you're not comfortable working on your vehicle yourself, it's always best to take it to a qualified mechanic. This process can be more challenging than it sounds for someone without experience.
