Here's how to find the correct information and then how to use it:
1. Find your Avenger's wheel specs:
* Check your existing rims: The bolt pattern (number of lug nuts and their spacing), diameter (usually 14", 15", 16" etc.), and width (e.g., 6", 7") are usually stamped on the inside or back of your current rims.
* Check your owner's manual: This should list the factory-recommended wheel sizes.
* Check online resources: Websites like Tire Rack or online forums dedicated to Dodge Avengers can provide information on common wheel sizes used on your model year.
2. Use the information to find compatible rims:
Once you have your bolt pattern, diameter, and width, you can start searching for compatible rims. Here's what's important:
* Bolt Pattern (PCD): This is the most critical specification. It needs to be an exact match. A common bolt pattern for Dodge Avengers is 5x114.3mm (sometimes listed as 5x4.5 inches). *Do not attempt to use rims with a different bolt pattern.*
* Wheel Diameter: You can generally use rims with a slightly larger diameter than the original, but going significantly smaller might cause clearance issues with brakes or suspension components. Always check for clearance before mounting.
* Wheel Width: The width should be relatively close to the original. Too wide might cause rubbing, and too narrow might affect handling and tire pressure.
* Offset: This is the distance between the mounting surface and the center line of the wheel. It affects how far the wheel sits inside or outside the wheel well. An offset that's too different can cause clearance issues, affecting your suspension or rubbing against body parts. You'll find this specification on the rim as well.
* Center Bore: This is the diameter of the hole in the center of the wheel. It needs to fit snugly over your car's hub. You can use a hub-centric ring if the center bore is slightly larger than the car's hub.
In short: Don't just rely on the year and make of the vehicle. You MUST find the exact specifications of your current rims to ensure safe and proper fitment of replacement rims. Using incompatible wheels is extremely dangerous.
