Instead of trying to reset it, you need to diagnose and fix the underlying problem. Here's how to approach it:
1. Get the ABS codes: You'll need an ABS code reader, specifically one that works with the GM ABS system used in that year. Auto parts stores often have these tools available for rent or they can scan it for you. The code(s) will pinpoint the faulty component. This is the crucial first step.
2. Common causes: Some frequent culprits for ABS light illumination on a 1995 S10 include:
* Faulty wheel speed sensor: These sensors monitor wheel rotation speed. A damaged sensor, wiring harness issue, or a corroded connector will trigger the light. These are relatively inexpensive and easy to replace, but you need to know *which* wheel sensor is bad (the code reader will help).
* ABS module failure: This is the "brain" of the ABS system. It's more expensive to replace and might require professional help.
* Low brake fluid: While not directly related to the ABS *system* itself, low brake fluid can trigger the ABS light as a safety precaution. Check your fluid level first.
* Wiring problems: Corrosion or damage to the wiring harness connected to the ABS system can cause intermittent or constant problems. This is often difficult to diagnose without specific testing equipment.
3. Repair the problem: Once you have the diagnostic code, you can identify the faulty component. Repair or replace the faulty part. You'll likely need some basic mechanical skills or the assistance of a mechanic for this.
4. After repair: After fixing the issue, the ABS light should automatically go out after a short drive (sometimes up to a few miles) once the system detects no further problems. If it remains on after driving, the problem might not have been fully resolved, and you need to re-check your diagnosis.
In short: Don't focus on resetting the light; focus on fixing the problem the light is indicating. Ignoring the ABS light is dangerous. A proper diagnosis using a code reader is the only reliable way to address the issue.
