* Locate Release Levers/Handles: The most common method involves levers or handles. These are usually located:
* On the seat itself: Look along the sides of the seatbacks, near the top or bottom. They might be hidden behind seat covers or trim.
* On the side walls of the van: Sometimes, the releases are located on the van's interior walls, near the seats.
* Underneath the seat: Less common, but some models have releases accessible only by reaching under the seat cushion.
* Inspect for Latch Mechanisms: Feel for any clips or latches that may need to be unfastened before the seat folds.
* Try Different Actions: Once you've found potential release mechanisms, try:
* Pulling the levers/handles: This is the most common action.
* Pushing the levers/handles: Less common, but possible.
* Lifting the seatback slightly: In some cases, you might need to lift the seatback slightly while operating the release.
* Simultaneously operating multiple releases: Some vans require you to operate more than one lever at the same time.
* Consult Your Owner's Manual: This is the most reliable source of information. The manual will have specific diagrams and instructions for your exact van model. If you don't have the manual, you might be able to find a digital version online by searching for "[Your specific 1995 Dodge Ram Van model] owner's manual PDF".
If you can't find any levers or handles:
* Check for hidden releases: Carefully inspect the area around the seatbacks and the side walls for any small, hidden buttons or levers.
* Look for any screws or bolts: It's less likely, but some seats might have a more permanent or fixed installation.
Important Note: Before attempting to fold the seats, be sure to remove any items from the seat and the area where it will fold. Some seats are heavy, so be careful when manipulating them to avoid injury.
