1. Park your vehicle on a level surface and turn off the engine.
2. Open the hood of your vehicle and locate the headlight assembly that you need to remove.
3. Disconnect the electrical connector that is attached to the back of the headlight assembly.
4. Remove the three bolts that secure the headlight assembly to the vehicle.
5. Gently pry the headlight assembly out of its housing, being careful not to damage the paint or body of the vehicle.
6. Once the headlight assembly is removed, you can replace it with a new one by following the steps in reverse order.
Here are some additional tips for removing the headlight assembly on a 1996 Chrysler Sebring convertible:
- Make sure that the vehicle is turned off and the engine is cool before starting the repair.
- If you are not comfortable working on electrical components, you can have a qualified mechanic perform the repair for you.
- Be careful not to drop the headlight assembly or damage the paint or body of the vehicle while removing or installing the assembly.
