* A new set of headlights (H7 bulbs)
* A Phillips head screwdriver
* A flat-head screwdriver
Instructions:
1. Park your Suburban on a level surface and turn off the engine.
2. Open the hood of your Suburban.
3. Locate the headlight assembly you want to replace. It is located behind the plastic cover on the front of the vehicle.
4. Use the Phillips head screwdriver to remove the screws holding the plastic cover in place.
5. Remove the plastic cover and set it aside.
6. Locate the headlight bulb. It is held in place by a metal clip.
7. Press down on the metal clip and release the bulb.
8. Remove the bulb and discard it.
9. Insert the new bulb into the headlight assembly.
10. Press down on the metal clip to secure the bulb in place.
11. Replace the plastic cover and secure it with the Phillips head screws.
12. Repeat steps 4-11 for the other headlight.
Your headlights are now changed.
