Where is the reverse light switch on an Toyota MR2 mark 2?

The reverse light switch on a Toyota MR2 Mark 2 is located on the top side of the transaxle casing. It is typically a two-wire switch, with one wire going to the reverse lights and the other wire going to ground. To replace the switch, you will need to:

1. Disconnect the negative terminal of your battery.

2. Remove the air filter assembly and intake pipe.

3. Remove the starter motor.

4. Disconnect the reverse light switch connector.

5. Unscrew the reverse light switch from the transaxle casing.

6. Install the new reverse light switch and tighten it into place.

7. Reconnect the reverse light switch connector.

8. Reinstall the starter motor.

9. Reinstall the intake pipe and air filter assembly.

10. Reconnect the negative terminal of your battery.