Tools:
Phillips head screwdriver
Replacement parking light bulb
Instructions:
1. Open the hood of your Dodge Stealth.
2. Locate the parking light assembly you want to change. It will be on either the front or side of the vehicle, near the headlights.
3. Use a Phillips head screwdriver to remove the screws holding the parking light assembly in place.
4. Once loosened, remove the parking light assembly from the car by gently prying it out.
5. Twist the old bulb counterclockwise to remove it from the socket.
6. Replace with a new bulb, being careful not to touch the glass portion.
7. Reattach the parking light assembly by pushing the assembly back into place.
8. Use the Phillips head screwdriver to replace the screws.
9. Repeat the process for the other side if needed.
10. Once you are finished, close the hood of the car.
