Auto >> AutoSPT >  >> Electric car

How do i jump start Mercedes clk 430 if cant get to the battery?

If you can't access the battery of your Mercedes CLK 430 to jump start it, you can follow these steps to jump start it using the positive jump start terminal in the engine compartment:

1. Park another car with a good battery close to your CLK 430 so that the jumper cables can reach both batteries.

2. Turn off the ignition of both cars.

3. Open the hood of your CLK 430 and locate the positive jump start terminal. It is usually marked with a "+" symbol and is located in the engine compartment, near the battery.

4. Connect one end of the positive jumper cable to the positive jump start terminal of your CLK 430.

5. Connect the other end of the positive jumper cable to the positive terminal of the other car's battery.

6. Connect one end of the negative jumper cable to the negative terminal of the other car's battery.

7. Clamp the other end of the negative jumper cable to an unpainted metal surface on your CLK 430, such as the engine block.

8. Start the engine of the other car and let it run for a few minutes.

9. Try to start your CLK 430. If it starts successfully, let it run for a few minutes with the jumper cables still connected.

10. Disconnect the jumper cables in the reverse order of how you connected them.

11. Close the hood of your CLK 430 and drive it for at least 30 minutes to recharge the battery.