* Phillips-head screwdriver
* Flat-head screwdriver
* 10mm socket wrench
* 10mm socket
* Extension bar
* Ratchet
* Small punch
Parts:
* New odometer
* Zip ties
Procedure:
1. Disconnect the negative terminal of the battery.
2. Remove the four Phillips-head screws that hold the instrument cluster in place.
3. Pull the instrument cluster out of the dashboard.
4. Disconnect the electrical connectors on the back of the instrument cluster.
5. Remove the four 10mm screws that hold the odometer in place.
6. Pull the odometer out of the instrument cluster.
7. Transfer the odometer gear from the old odometer to the new odometer.
8. Install the new odometer into the instrument cluster.
9. Secure the odometer with the four 10mm screws.
10. Reconnect the electrical connectors to the back of the instrument cluster.
11. Slide the instrument cluster back into the dashboard.
12. Secure the instrument cluster with the four Phillips-head screws.
13. Reconnect the negative terminal of the battery.
14. Verify that the new odometer is functioning correctly.
