1. Disconnect the battery. This will prevent any electrical accidents while you're working.
2. Remove the door panel. The process for this will vary depending on your car model. Consult your owner's manual for specific instructions.
3. Locate the window motor. It's usually mounted inside the door, attached to the window regulator.
4. Disconnect the electrical connector from the window motor.
5. Remove the bolts that hold the window motor in place.
6. Carefully remove the window motor from the door.
7. Once the window motor is removed, you can insulate the wiring to prevent any power draw. Electrical tape or heat shrink tubing can be used for this purpose.
8. Reinstall the door panel and reconnect the battery.
By following these steps, you can safely remove the electric window motor to prevent it from draining your car battery.
