1. Turn off the engine and open the seat. The seat is usually held closed with a latch or lock at the front. Once the latch is released, the seat can be pulled up and removed.
2. Remove the battery cover. On the right side of the bike, you will see a black cover that covers the battery. The cover is held in place with two screws. Remove the screws and lift off the cover.
3. Locate the battery. The battery is a black box that is located in the center of the battery box.
4. Disconnect the battery terminals. There are two terminals on the battery: a positive terminal (marked with a "+") and a negative terminal (marked with a "-"). To disconnect the terminals, simply loosen the nuts on the terminals and lift off the wires. Be careful not to touch the positive and negative terminals together, as this could cause a short circuit.
5. Remove the battery. Once the terminals are disconnected, you can lift the battery out of the box. Be careful not to drop the battery, as it is heavy.
6. Reinstall the battery in reverse order. When you are finished servicing the battery, simply reinstall it in reverse order. Be sure to tighten the terminal nuts securely.
