1. Park your Camaro in a safe, well-lit area and apply the parking brake.
2. Open the trunk of your Camaro.
3. Locate the brake light assembly on the affected side. On the 1994 Camaro, the brake light assembly is located on the back of the taillight housing.
4. Remove the two screws that hold the brake light assembly in place. They may already have wingnuts.
5. Once the screws are removed, gently pry the brake light assembly out of the taillight housing. Be careful not to damage the paint on your Camaro.
6. Remove the old brake light bulb from the socket by turning it counterclockwise.
7. Insert the new brake light bulb into the socket and turn it clockwise until it is secure.
8. Reinstall the brake light assembly into the taillight housing and replace the two screws. Make sure nuts are tight.
9. Test the brake lights to ensure the new bulb is working properly.
10. Close the trunk of your Camaro.
Please note that some 1994 Camaros may have different brake light assemblies or bulbs. If you are unsure which bulb to replace or how to access it, consult the owner's manual for your specific vehicle.
