1. The thermostat for a 1995 Mazda 929 is located on the front of the engine, just below the upper radiator hose.
2. It is held in place by two bolts.
3. To remove the thermostat, you will need a 10 mm wrench.
4. Once the bolts are removed, you can lift the thermostat out of its housing.
5. Be careful not to lose the gasket that is between the thermostat and the housing.
6. When you install the new thermostat, be sure to put the gasket back in place.
7. Tighten the bolts until they are snug.
