- DVD player
- Headrest mount
- Mounting screws
- Wire harness
- Phillips-head screwdriver
- Utility knife
- Wire strippers
- Electrical tape
Step 2: Remove the headrest from the seat.
- Pull up on the release lever on the side of the headrest to remove it from the seat.
Step 3: Attach the headrest mount to the headrest.
- Position the headrest mount on the back of the headrest.
- Use the mounting screws to secure the headrest mount in place.
Step 4: Connect the DVD player to the headrest mount.
- Slide the DVD player into the headrest mount.
- Secure the DVD player in place using the included mounting screws.
Step 5: Connect the wire harness to the DVD player.
- Match the colors of the wires on the wire harness to the corresponding colors on the DVD player.
- Connect the wires using the included wire connectors.
Step 6: Route the wire harness under the seat and to the fuse box.
- Use the utility knife to make a small slit in the carpet under the seat.
- Route the wire harness through the slit and under the seat.
- Connect the fuse box to the wire harness
Step 7: Test the DVD player.
- Turn on the DVD player and make sure it is working properly.
Step 8: Reinstall the headrest.
- Slide the headrest back into its slots in the seat.
