2000 Saturn LS1 come out of park unless I turn the key to acc then it will move and can start in neutral If put again have off do same thing again?

Problem: 2000 Saturn LS1 will not come out of park unless the key is turned to the ACC (accessory) position. The vehicle can be started in neutral, but if put in park again, it will not come out of park without repeating the process of turning the key to ACC.

Possible Causes:

- Faulty shift lock solenoid: The shift lock solenoid is responsible for locking and unlocking the gear shifter. If the solenoid is faulty, it may not be able to disengage the gear shifter from the park position.

- Faulty ignition switch: The ignition switch provides power to the shift lock solenoid. If the ignition switch is faulty, it may not be able to provide enough power to the solenoid to disengage the gear shifter.

- Faulty wiring: The wiring between the ignition switch and the shift lock solenoid may be faulty, preventing the solenoid from receiving power.

Solution:

To troubleshoot this issue, you will need to check the shift lock solenoid, ignition switch, and wiring. If you are not comfortable performing this task yourself, it is best to take your vehicle to a qualified mechanic.

Here are some general steps that you can follow:

1. Check the shift lock solenoid: The shift lock solenoid is usually located near the transmission. It is a small, cylindrical device with a wire connector attached to it. Check the wire connector for any damage or corrosion. If the wire connector is damaged, replace it. If the wire connector is in good condition, you can try to actuate the solenoid manually. You can do this by turning the key to the ACC position and then pressing down on the shift lock button. If the solenoid is working properly, you will hear a clicking sound and the gear shifter will be released.

2. Check the ignition switch: The ignition switch is located on the dashboard. It is a small, cylindrical device with a wire connector attached to it. Check the wire connector for any damage or corrosion. If the wire connector is damaged, replace it. If the wire connector is in good condition, you can try to turn the key to the ACC position and see if the gear shifter is released.

3. Check the wiring: If the shift lock solenoid and ignition switch are both working properly, the problem may be with the wiring. Check the wiring between the ignition switch and the shift lock solenoid for any damage or corrosion. If you find any damaged wiring, repair or replace it.

Once you have identified and fixed the problem, your Saturn LS1 should be able to come out of park without any issues.