Auto >> AutoSPT >  >> Electric car

How do you change out an ignition switch in a 1993 Safari Van The sometimes catch to start not the battery?

1. Disconnect the battery.

2. Remove the steering column cover.

3. Remove the ignition switch retaining bolts.

4. Pull the ignition switch out of the steering column.

5. Disconnect the wiring harness from the ignition switch.

6. Install the new ignition switch.

7. Connect the wiring harness to the ignition switch.

8. Insert the ignition switch into the steering column.

9. Install the ignition switch retaining bolts.

10. Reinstall the steering column cover.

11. Reconnect the battery.

Auto Repair
How do you replace the wiper switch on a 1992 Corvette? How do you remove the driver side door panel of a 1998 Pontiac grand am?
Car Care
Replace Sun Visor of Your Vehicle This Way Extended Car Warranty for Old Cars – Here’s The Truth Finding a Good Mechanic Is Important – Let NARPRO Help!
Engine
What will cause no power to fuel pump relay on a 1991 Pontiac firebird? Will a 4.6L engine from 99-04 mustang fit in 3.8L v6?
Electric Car
Where is the heater blower motor resistor for a 1998 Dodge Dakota located? What motor would a 1983 Ford E350 have in it It is MIDAS Motor Home? Where is the radiator drain plug on a 1990 Acura Integra RS?
Autopilot
Do you have to use the clutch when shifting riding a dirt bike? Besides Personal Travel, How Can Driverless Technology be Used?
Car Photos
Do you have a picture diagram for the firing order of 1994 Chevy Astro van motor to distributor? Why did the Cadillac emblem change? What is the best Volvo?