How do you get a stuck power window in 2002 ford F 350 up?

1. Locate the power window fuse. The fuse for the power window is usually located in the fuse box under the hood of the truck. It is labeled "PWR WDO" or something similar.

2. Check the fuse. If the fuse is blown, replace it with a new fuse of the same amperage.

3. Try the power window again. If the power window still does not work, the problem may be with the power window motor or switch.

4. Test the power window motor. To test the power window motor, disconnect the electrical connector from the motor and apply 12 volts directly to the motor terminals. If the motor runs, the problem is with the power window switch or wiring.

5. Test the power window switch. To test the power window switch, disconnect the electrical connector from the switch and use a multimeter to test for continuity between the terminals. If there is no continuity, the switch is faulty and needs to be replaced.

6. Repair or replace the faulty component. If the power window motor or switch is faulty, it will need to be repaired or replaced. Once the faulty component is repaired or replaced, the power window should work properly again.