Auto >> AutoSPT >  >> Electric car

How do you a drive cycle on 1998 Ford Expedition?

To perform a drive cycle on a 1998 Ford Expedition, follow these steps:

1. Start the engine and let it idle for at least 2 minutes.

2. Drive at 45 mph for 5 minutes.

3. Accelerate to 65 mph and maintain that speed for at least 3 minutes.

4. Decelerate to 45 mph and maintain that speed for at least 3 minutes.

5. Accelerate to 30 mph and maintain that speed for at least 3 minutes.

6. Decelerate to 15 mph and maintain that speed for at least 3 minutes.

7. Accelerate to 25 mph and maintain that speed for at least 3 minutes.

8. Drive at 35 mph for 5 minutes.

9. Park the vehicle and let it idle for at least 2 minutes.

10. Turn the ignition off and leave the vehicle parked for at least 8 hours.

Note: The drive cycle may vary depending on the vehicle model and year. Consult your vehicle's owner's manual for the specific drive cycle procedure.