* Phillips head screwdriver
* Flat head screwdriver
* Pliers
1. Turn off the engine and disconnect the battery.
2. Remove the four screws that hold the CD player in place.
3. Slide the CD player out of the dash.
4. Remove the two screws that hold the metal bracket to the CD player.
5. Disconnect the two wiring harnesses from the back of the CD player by squeezing on the release tabs.
6. Remove the CD player from the bracket.
To install a new CD player, simply reverse the steps above. Be sure to connect the wiring harnesses correctly, as reversing the polarity could damage the new unit.
