1. Turn off the car's ignition and disconnect the negative battery cable.
2. Remove the screws that hold the old stereo in place.
3. Pull the old stereo out of the dash.
4. Disconnect the wiring harness from the old stereo.
Step 2: Prepare the New Stereo
1. If your new stereo came with a mounting kit, read through the instructions to understand the kit and the tools you will need for the installation.
2. Prepare the wiring harness by matching the wires from the new stereo to the wires from Toyota.
Note: You may need to use a voltmeter to determine which wire is which.
3. Connect the new stereo's wiring harness to Toyota's wiring harness.
4. Test the new stereo to ensure that it works correctly.
Step 3: Install the New Stereo
1. Slide the new stereo into the dash.
2. Secure the new stereo in place with the screws that you removed in Step 1.
3. Reconnect the negative battery cable.
4. Enjoy your new stereo!
Here are some additional tips for installing a stereo into a Toyota Paseo:
- If your Paseo has a factory amplifier, you will need to bypass it to use the new stereo.
- If your new stereo has a USB port, connect it to the rear USB port of Toyota.
- If you plan to use a subwoofer, you will need to run a power wire from the battery to the subwoofer.
