- Spark plugs (4)
- Spark plug wrench
- Ratchet
- 5/8-inch socket
- Extension
- Rag
Instructions:
1. Turn off the engine and allow it to cool down completely. This is important to prevent burns.
2. Locate the spark plugs. The spark plugs are located on the top of the engine, near the front.
3. Disconnect the spark plug wires. Use the spark plug wrench to loosen the spark plug wires and remove them from the spark plugs.
4. Remove the old spark plugs. Use the ratchet and 5/8-inch socket to loosen and remove the old spark plugs.
5. Install the new spark plugs. Hand-tighten the spark plugs until they are snug, then use the ratchet to tighten them securely.
6. Reconnect the spark plug wires. Attach the spark plug wires to the spark plugs, and tighten them securely with the spark plug wrench.
7. Start the engine and test it. Start the engine and let it run for a few minutes. Check for any leaks or problems.
Here are some additional tips:
- Use the proper tools and materials.
- Be careful when working around the engine.
- Avoid touching the spark plug wires while the engine is running.
