Parts Needed:
- New tail lights (2)
- Phillips Head Screwdriver
- Flat Head Screwdriver
Instructions:
1. Park your car on a flat surface and open the trunk.
2. Locate the two plastic clips that hold the taillight in place. They are located on the inside of the trunk, on either side of the taillight.
3. Pry the clips off using a flathead screwdriver.
4. Disconnect the electrical connector from the taillight.
5. Repeat steps 2-4 on the other side.
6. Position the new tail light into place and insert the plastic clips to hold it in place.
7. Reconnect the electrical connector.
8. Test the tail lights to ensure they are working properly.
