1. Replacement headlights (H7 bulbs)
2. Phillips-head screwdriver
3. Flat-head screwdriver or pry tool
4. Clean microfiber cloth
Instructions:
1. Park the vehicle and turn off the ignition.
Make sure the engine has cooled down if the vehicle was recently driven.
2. Open the hood of the car:
Locate and release the hood release lever inside the vehicle, usually on the driver's side.
3. Locate the headlight housing.
The headlight assembly is usually located behind a plastic cover at the front of the car.
4. Remove the cover.
Use a flat-head screwdriver or pry tool to gently pry open the cover.
5. Remove the old headlight bulb.
Locate the headlight bulb inside the housing. Turn the bulb counterclockwise to loosen and remove it.
6. Clean the headlight housing.
Use a clean microfiber cloth to wipe the inside of the housing to remove any dirt or debris.
7. Insert the new headlight bulb.
Align the new bulb with the socket and turn clockwise to secure it in place.
8. Replace the headlight housing cover.
Press down on the cover to snap it back into place.
9. Close the hood of the vehicle.
Ensure that the hood is properly closed and latched before driving.
Please note that the steps may vary slightly depending on the exact Kia Amanti model and year. Consult the vehicle's owner's manual or a repair guide for specific instructions pertaining to your vehicle.
