Tools and Materials Needed:
1. New cabin air filter (Consult your vehicle's owner manual for the correct size and type)
2. Phillips-head screwdriver
3. Clean cloth
Instructions:
1. Locate the Cabin Air Filter Housing:
- Open the front passenger side door.
- On the lower right side of the dashboard (beneath the glove box), you should find a plastic cover marked "Fresh Air Intake" or "Pollen Filter."
2. Remove the Filter Housing Cover:
- Use the Phillips-head screwdriver to loosen the screws that secure the filter housing cover.
- Once the screws are removed, gently pry the cover off.
3. Remove the Old Filter:
- Once the cover is removed, you will see the old cabin air filter inside the housing.
- Grasp the filter and gently pull it straight out.
4. Inspect the Old Filter:
- Take a moment to inspect the old filter for dirt, debris, and any unusual wear or damage.
- If the filter is significantly dirty or damaged, it's time to replace it.
5. Clean the Filter Housing:
- Use a clean, dry cloth to wipe away any dust or debris that may have accumulated inside the filter housing.
6. Insert the New Filter:
- Take the new cabin air filter and ensure that it is oriented correctly.
- Insert the new filter into the housing, ensuring that it is snugly in place.
7. Replace the Filter Housing Cover:
- Replace the filter housing cover and tighten the screws to secure it.
8. Close the Glove Box:
- Close the glove box to complete the filter replacement.
That's it! You have successfully replaced the cabin air filter in your 2002 Honda Civic. Make sure to refer to your vehicle's owner manual for any specific instructions or recommendations regarding cabin air filter replacement.
