- Phillips-head screwdriver
- Small flat-head screwdriver
- Wire strippers
- Crimp connectors
Instructions:
1. Disconnect the negative battery terminal.
2. Remove the child seat restraint nut covers and nuts located on the bottom of the rear seat.
3. Remove the two screws located at the front of the rear seat cushion. Using a small prying tool, pry up the rear of the seat cushion and remove it.
4. Remove the four bolts that hold the seat belt buckle to the floor.
5. Fold the front seat forward and remove the two bolts that hold the rear seat back to the floor.
6. Remove the rear seat back.
7. Remove the four screws that hold the speaker cover in place.
8. Remove the speaker cover.
9. Disconnect the speaker wires from the speaker terminals.
10. Using wire strippers, remove approximately 1/2-inch of insulation from the speaker wires.
11. Connect the positive speaker wire to the positive terminal on the new speaker.
12. Connect the negative speaker wire to the negative terminal on the new speaker.
13. Crimp the connectors to secure the speaker wire connections.
14. Repeat steps 11-13 for the other speaker.
15. Replace the speaker cover.
16. Replace the rear seat back.
17. Replace the bolts that hold the seat belt buckle to the floor.
18. Replace the two bolts that hold the rear seat back to the floor.
19. Replace the four bolts that hold the rear seat cushion to the floor.
20. Replace the child seat restraint nut covers and nuts located on the bottom of the rear seat.
21. Reconnect the negative battery terminal.
