* New fuel filter (check your owner's manual for the correct size)
* Fuel line wrench
* Screwdriver
* Pliers
* Rags
* Safety glasses
Step 2: Park your car in a safe location.
Park your car on a level surface, and apply the parking brake. Turn off the engine and allow it to cool down completely.
Step 3: Locate the fuel filter.
The fuel filter is located on the underside of the car, near the fuel tank. It is usually a cylindrical-shaped object with two fuel lines connected to it.
Step 4: Disconnect the fuel lines.
Use the fuel line wrench to loosen the fuel lines that are connected to the fuel filter. Be careful not to spill any fuel.
Step 5: Remove the old fuel filter.
Use the screwdriver to remove the screws that hold the fuel filter in place. Then, remove the fuel filter from the car.
Step 6: Install the new fuel filter.
Place the new fuel filter in the same position as the old fuel filter. Then, use the screwdriver to secure the fuel filter in place.
Step 7: Reconnect the fuel lines.
Use the fuel line wrench to tighten the fuel lines that are connected to the fuel filter. Be careful not to overtighten the fuel lines.
Step 8: Start the engine and check for leaks.
Start the engine and let it run for a few minutes. Check for any leaks from the fuel filter or the fuel lines. If you see any leaks, tighten the fuel lines until the leaks stop.
Congratulations! You have now successfully changed the fuel filter on your 1999 Toyota Camry 4 cylinder.
