1. Gather tools and materials:
* New air filter (check your owner's manual for the correct size)
* Flathead screwdriver
* Phillips head screwdriver
2. Open the hood:
* Pull the hood release lever located inside your vehicle near the driver's seat.
* Go to the front of the vehicle and lift the hood.
* Locate the hood prop and secure the hood in the open position.
3. Locate the air filter:
* The air filter housing is located on the top-right side of the engine bay, near the firewall.
* It's a black plastic box with a lid that says "AIR FILTER."
4. Remove the lid:
* Use the flat head screwdriver to pry open the lid of the air filter housing.
5. Remove the old filter:
* Lift out the old air filter.
6. Inspect the filter:
* Check the filter for dirt, debris, or damage. If the filter is clogged or damaged, replace it.
7. Install the new filter:
* Place the new filter into the air filter housing.
* Make sure the filter is seated properly.
8. Replace the lid:
* Replace the lid of the air filter housing and secure it using the flat head screwdriver.
9. Close the hood:
* Lower the hood and secure the latch.
* Close the hood release lever back in.
