1. Turn on the ignition of your car. This will power up the audio system.
2. Press and hold the "Eject" button on the audio control panel for at least 10 seconds. The CD should eject from the slot.
3. If the CD does not eject, try the following steps:**
* Turn on the ignition of your car.
* Press and hold the "Eject" button on the audio control panel while simultaneously pressing the "Power" button. The CD should eject from the slot.
* If the CD still does not eject, you may need to remove the audio control panel to access the CD player mechanism.
4. To remove the audio control panel, you will need:**
* A Phillips head screwdriver
* A flat-head screwdriver
* A pair of pliers
5. Follow these steps to remove the audio control panel:**
* Turn off the ignition of your car.
* Remove the two Phillips head screws that hold the audio control panel in place.
* Use a flat-head screwdriver to pry the audio control panel out of the dashboard.
* Disconnect the electrical connectors from the back of the audio control panel.
6. Once you have removed the audio control panel, you will be able to access the CD player mechanism. The CD player mechanism is located behind the CD slot.
7. Use the pliers to remove the CD from the CD player mechanism.
8. Once you have removed the CD, reattach the electrical connectors to the back of the audio control panel.
9. Replace the audio control panel in the dashboard and secure it with the two Phillips head screws.
10. Turn on the ignition of your car and test the audio system to ensure that it is working properly.
