1. Over-tightening the cable: If you tightened the parking brake cable too much, it could cause the brakes to engage even when the parking brake lever is released. To fix this, try loosening the cable slightly until the brakes release.
2. Binding or seized brake components: If the brake calipers, rotors, or other components are binding or seized, it could prevent the brakes from releasing fully. Try inspecting the brake system for any signs of binding, such as uneven wear on the brake pads or rotors. If you find any binding components, you may need to clean or replace them.
3. Leaking brake fluid: If there is a leak in the brake fluid line, it could cause the brakes to lose pressure and not fully disengage. Check the brake fluid level and lines for any leaks. If you find a leak, you will need to repair it.
4. Faulty parking brake lever or mechanism: If the parking brake lever or mechanism is faulty, it could prevent the brakes from releasing fully. Try inspecting the lever and mechanism for any signs of damage or wear. If you find any problems, you may need to repair or replace the faulty parts.
If you are unable to resolve the issue by following these steps, you should consult with a qualified mechanic for further assistance.
