- 10mm wrench
- New positive battery cable
Instructions:
1. Park your Geo Metro in a safe location and turn off the engine.
2. Open the hood of your car.
3. Locate the positive battery terminal. It is typically marked with a red (+) sign.
4. Use the 10mm wrench to loosen the nut on the positive battery terminal.
5. Remove the nut and the positive battery cable from the terminal.
6. Inspect the battery cable for damage. If it is damaged, replace it with a new battery cable.
7. Connect the new battery cable to the positive battery terminal.
8. Tighten the nut on the positive battery terminal until it is snug.
9. Close the hood of your car.
