Yes, you can jump start the battery on a 1998 Chevy Lumina by following the instructions in this guide.
Warning: Before you begin, make sure that you have the following items on hand;
- Jumper cables
- Another car with a working battery.
Step 1: Ensure both cars are in park and turned off.
Before attempting to jump-start the Lumina, ensure both vehicles are in park and turned off. Turn the ignition off and ensure the transmission is in park position.
Step 2: Locate the battery of both vehicles.
In most cars, the battery is placed under the hood. Open the hood of the Lumina and locate the battery. The battery in the Lumina is usually placed on the driver’s side of the engine. The other car’s battery should also be under the hood.
Step 3: Connect the red positive jumper cable.
Take the red positive jumper cable and connect it to the positive terminal of the Lumina’s battery. Ensure a solid connection and make sure the clamp is securely attached.
Step 4: Connect the red positive jumper cable to the other vehicle.
Connect the other end of the red positive jumper cable to the positive terminal of the other vehicle’s battery.
Step 5: Connect the black negative jumper cable.
Take the black negative jumper cable and connect it to the negative terminal of the other vehicle’s battery.
Step 6: Connect the black negative jumper cable to the unpainted metal of the Lumina.
Connect the other end of the black negative jumper cable to a convenient, unpainted metal surface on the Lumina.
Step 7: Start the working car.
Once all cables are securely connected, start the vehicle with the working battery. Let it idle for a few minutes.
Step 8: Attempt to start the Lumina.
Try to start the Lumina. If it starts successfully, let it run for a few minutes.
Step 9: Disconnect the jumper cables.
After the Lumina has run for a few minutes, begin to disconnect the jumper cables in the reverse order of how they were connected.
Step 10: Allow the Lumina to run.
Let the Lumina run for a while to recharge the battery.
Note: If the Lumina does not start after several attempts, there could be an underlying issue that needs to be diagnosed. In this case, it is advisable to seek the assistance of a professional mechanic.
