Tools Needed:
•Replacement Battery
•10mm Socket
•6mm Socket
•Phillips Head Screwdriver
•Flat Head Screwdriver
Instructions:
1. Open the hood of the vehicle and locate the battery which is on the driver’s side.
2. Using the 10mm socket, loosen and remove the positive and negative terminals from the battery.
3. Next, remove the nut on the clamp with the 6mm socket.
4. Remove the bolt under the ground cable with a Phillips Head Screwdriver.
5. Lift up the battery clamp.
6. Remove the old battery.
7. Clean the battery tray with a flathead screwdriver.
8. Carefully place the new battery in the tray.
9. Replace the ground bolt and tighten it with a Phillips head screwdriver.
10. Secure the battery clamp with a 6 mm socket.
11. Reattach both positive and negative terminal connections with a 10 mm socket.
