- Jack and jack stands
- Lug wrench
- Socket set
- Spring compressor
- Safety glasses
- Gloves
Instructions
1. Park the van on a level surface and apply the parking brake.
2. Loosen the lug nuts on the front wheels, but do not remove them.
3. Use the jack and jack stands to raise the van until the front wheels are off the ground.
4. Remove the lug nuts and wheels.
5. Locate the coil springs on the front of the van. They are located between the lower control arm and the upper control arm.
6. Use the spring compressor to compress the coil spring.
7. Once the coil spring is compressed, use the socket set to remove the lower and upper control arm bolts.
8. Remove the coil spring from the van.
Please note that this is a dangerous procedure and should be performed with extreme caution. If you do not feel comfortable performing this procedure, you should take your vehicle to a qualified mechanic.
