*Tools Needed*
* 3/8 inch drive ratchet and socket set
* 1/4 inch drive ratchet and socket set
* Spark plug socket
* Spark plug gap tool
1. Disconnect the negative battery cable.
2. Remove the air filter housing.
3. Remove the engine cover.
4. Remove the coil packs by unbolting the 2 bolts that hold each one in place.
5. Use a spark plug socket to remove the spark plugs.
6. Gap the new spark plugs to .060 inches.
7. Install the new spark plugs and tighten them to 18 ft-lbs.
8. Reinstall the coil packs and tighten the bolts to 10 ft-lbs.
9. Reinstall the engine cover.
10. Reinstall the air filter housing.
11. Reconnect the negative battery cable.
