The fuel filter is located on the passenger side inner fender of your 2000 Ford F350 Powerstroke. It is a cylindrical-shaped part with two fuel lines. One fuel line goes into the filter and one fuel line goes out of the filter. The fuel filter is also held in place by a bracket that is attached to the inner fender.
Here are step-by-step instructions on how to replace the fuel filter on your 2000 Ford F-350 Powerstroke:
1. Park your vehicle on a level surface and turn off the engine.
2. Locate the fuel filter on the passenger side inner fender.
3. Place a drain pan under the fuel filter to catch any fuel that may spill.
4. Use a wrench to loosen the two fuel line fittings that are attached to the filter.
5. Disconnect the fuel lines from the filter and allow the fuel to drain into the drain pan.
6. Remove the bracket that holds the fuel filter in place.
7. Remove the old fuel filter from the bracket.
8. Install the new fuel filter into the bracket.
9. Reinstall the bracket that holds the filter in place.
10. Reinstall the fuel lines to the filter.
11. Tighten the fuel line fittings until they are snug.
12. Start the engine and check for any leaks.
