1. Disconnect the battery. This is an important safety step to take before working on any electrical components. To disconnect the battery, simply turn the key to the "off" position and remove the negative terminal cable from the battery.
2. Remove the glove compartment. The glove compartment can be removed by opening it and pressing the release button on the inside. Once the release button is pressed, the glove compartment can be pulled out.
3. Remove the blower motor cover. The blower motor cover is located behind the glove compartment. It is attached with screws, which can be removed with a screwdriver. Once the screws are removed, the blower motor cover can be pulled off.
4. Remove the blower motor. The blower motor is located behind the blower motor cover. It is attached with screws, which can be removed with a screwdriver. Once the screws are removed, the blower motor can be pulled out.
5. Clean the blower motor and the housing. The blower motor and housing can be cleaned with a vacuum cleaner and compressed air.
6. Reassemble the blower motor. To reassemble the blower motor, simply reverse the steps that were taken to remove it.
7. Reconnect the battery. Once the blower motor is reassembled, reconnect the negative terminal cable to the battery.
*This process may vary depending on your specific make and model of car, so it is always best to consult a repair manual or a professional mechanic if you are unsure of any of the steps involved.*
