If you're having problems with your power latches, you may need to replace the hoses. To do this, you'll need to remove the power latch controller. First, disconnect the electrical connector from the controller. Then, remove the two bolts that hold the controller in place. Once the controller is removed, you can disconnect the hoses from it.
To install the new hoses, simply connect them to the power latch controller and reconnect the electrical connector. Then, reinstall the controller and tighten the bolts.
Here are some additional tips for troubleshooting power latch problems:
* Check the fuses for the power latches. If any of the fuses are blown, replace them.
* Make sure that the power latch controller is getting power. You can check this by using a multimeter to test the voltage at the controller.
* If the power latch controller is not getting power, you may need to replace it.
* If you're still having problems with your power latches, you may need to take your car to a qualified mechanic.