The oil drain plug is located on the bottom of the engine, near the rear of the bike. It is a 17mm bolt, and it may be difficult to reach depending on the type of bike you have.
To Drain the Oil:
1. Place an oil pan under the oil drain plug.
2. Use the appropriate wrench to loosen and remove the oil drain plug.
3. Allow the oil to drain completely into the oil pan.
4. Reinstall the oil drain plug and tighten it securely.
Tips:
* It is best to change your oil when the engine is warm. This will help the oil to drain more easily.
* Be careful not to over-tighten the oil drain plug. This could damage the threads on the plug or in the engine.
* If you are unable to reach the oil drain plug, you may need to remove the skid plate or other components to gain access.
* Always dispose of used oil properly. It is illegal to pour used oil down the drain or into the ground.
