1. Gather your materials. You will need:
* 2-stroke dirt bike oil
* Gasoline
* A measuring cup
* A funnel
* A container to mix the oil and gas in
2. Determine the oil-to-gas ratio for your dirt bike. This information can be found in your owner's manual. Common oil-to-gas ratios for 2-stroke dirt bikes are 32:1, 40:1, and 50:1.
3. Measure the correct amount of oil. Use the measuring cup to measure out the correct amount of oil based on the oil-to-gas ratio. For example, if you are using a 32:1 ratio, you will need to measure out 1 ounce of oil for every 32 ounces of gasoline.
4. Pour the oil into the container. Add the measured oil to the container you will be using to mix the oil and gas.
5. Add the gasoline. Slowly pour the gasoline into the container with the oil. Be careful not to spill any gas.
6. Mix the oil and gas thoroughly. Use the funnel to mix the oil and gas together until they are well combined.
7. Pour the mixture into your dirt bike's gas tank. Use the funnel to pour the mixture into the gas tank. Be careful not to spill any gas.
8. Start your dirt bike and let it run for a few minutes. This will help to circulate the oil and gas mixture throughout the engine.
Tips:
* Always wear gloves and eye protection when mixing 2-stroke dirt bike oil.
* Do not mix 2-stroke oil with 4-stroke oil. This can damage your dirt bike's engine.
* If you are not sure about the oil-to-gas ratio for your dirt bike, consult your owner's manual or a qualified mechanic.
* Store 2-stroke dirt bike oil in a cool, dry place.
