1. Park the ATV on a level surface and turn off the engine.
2. Locate the transmission oil level sight glass on the right side of the engine, just above the footpeg.
3. Clean the sight glass with a clean cloth so that you can see the oil level clearly.
4. Look at the oil level in the sight glass. The oil level should be between the "FULL" and "ADD" marks on the sight glass. If the oil level is below the "ADD" mark, add enough transmission oil to bring the level up to the "FULL" mark.
5. Replace the transmission oil filler cap and tighten it securely.
Note: If the transmission oil is overfilled, it can cause the ATV to slip and lose power. If the transmission oil is underfilled, it can cause the gears to wear out prematurely.
