The McCulloch Powermac 320 chain saw requires a fuel mixture of gasoline and 2-cycle oil. The ratio of gasoline to oil is 40:1. This means that for every 40 parts of gasoline, you will need to add 1 part of 2-cycle oil.
Mixing Instructions
1. Start with a clean, dry fuel container.
2. Add the correct amount of gasoline to the fuel container.
3. Add the correct amount of 2-cycle oil to the fuel container.
4. Shake the fuel container vigorously for at least 30 seconds to mix the gasoline and oil thoroughly.
Important Notes
* Always use fresh fuel in your McCulloch Powermac 320 chain saw. Fuel that is more than 30 days old can cause problems with the engine.
* Never use E15 or E85 fuel in your McCulloch Powermac 320 chain saw. These fuels can damage the engine.
* Be sure to follow the manufacturer's instructions for operating and maintaining your McCulloch Powermac 320 chain saw.
