Auto >> AutoSPT >  >> Engine

How do you put gas in a 1992 Cadillac Brougham?

You put gas in a 1992 Cadillac Brougham the same way you would put gas in any other car:

1. Park your car safely: Find a safe spot to park your car, ideally away from traffic and pedestrians.

2. Turn off the engine: Make sure the engine is off and the car is in park.

3. Locate the gas tank flap: This is usually on the driver's side of the car, but it could be on the passenger side depending on the model. It should have a small lever or button to release the flap.

4. Open the gas tank flap: Push or pull the lever/button to open the flap and reveal the gas tank opening.

5. Insert the gas nozzle: Gently insert the nozzle of the gas pump into the opening.

6. Fuel up: Hold the gas nozzle securely and start fueling the car. You'll hear a click when the tank is full.

7. Remove the nozzle: Once the tank is full, gently remove the nozzle.

8. Close the gas tank flap: Securely close the gas tank flap.

9. Pay for your gas: Proceed to pay for the gas at the pump.

Important Note: Always be careful when handling gasoline and avoid spilling it. If you do spill any, clean it up immediately.