Auto >> AutoSPT >  >> Engine

Why would your 2006 Mitsubishi endeavor tcl light and service engine soon come on the car shakes this just started?

I can't diagnose your car issue remotely. However, I can offer some common reasons why your 2006 Mitsubishi Endeavor's TCL light and Service Engine Soon light might be on, accompanied by shaking:

Possible Causes:

* Misfire: A misfire occurs when one or more cylinders in your engine don't ignite properly. This can be caused by faulty spark plugs, ignition coils, fuel injectors, or a problem with the engine control module (ECM). Misfires can cause shaking, rough idling, and reduced power.

* Spark Plugs: Worn or fouled spark plugs are a common cause of misfires. They should be replaced every 30,000-50,000 miles.

* Ignition Coils: Ignition coils are responsible for delivering high voltage to the spark plugs. A faulty coil can cause a misfire in one or more cylinders.

* Fuel Injectors: Fuel injectors deliver fuel to the cylinders. Clogged or faulty injectors can cause a misfire.

* Oxygen Sensor: Oxygen sensors monitor the amount of oxygen in the exhaust. A faulty sensor can lead to incorrect fuel/air ratios, causing misfires and triggering the "Service Engine Soon" light.

* Engine Control Module (ECM): The ECM is the computer that controls your engine's operation. A faulty ECM can cause a variety of problems, including misfires.

* Vacuum Leak: A vacuum leak can disrupt the proper flow of air into the engine, leading to misfires and rough idling.

* Faulty Catalytic Converter: A damaged or clogged catalytic converter can also trigger the "Service Engine Soon" light.

What to Do:

1. Check for Codes: Use an OBD2 scanner to read the trouble codes stored in your car's computer. This will provide valuable information about the potential issue.

2. Inspect Spark Plugs: Check the condition of your spark plugs and replace them if necessary.

3. Inspect Ignition Coils: Visually inspect the ignition coils for damage or corrosion.

4. Test Fuel Injectors: You can test the fuel injectors using a fuel injector tester.

5. Inspect Vacuum Hoses: Check for any cracks, leaks, or loose connections in the vacuum hoses.

6. Consult a Mechanic: If you're not comfortable diagnosing the problem yourself, consult a qualified mechanic for professional diagnosis and repair.

Remember:

* This information is for general guidance and may not apply to all situations.

* Don't ignore the warning lights. Get your car checked by a mechanic as soon as possible.

By addressing these potential causes, you can diagnose and hopefully resolve the issue with your 2006 Mitsubishi Endeavor.