1. Open the hood of your Intrepid.
2. Locate the radiator at the front of the engine bay.
3. Follow the upper radiator hose from the radiator to the engine.
4. The thermostat housing will be located where the upper radiator hose connects to the engine.
5. The thermostat is located inside the thermostat housing.
Additional information:
- The thermostat on a Dodge Intrepid 2.7 is located on the front of the engine, just above the water pump.
- The thermostat is held in place by two bolts.
- To remove the thermostat, you will need to drain the coolant from the engine.
Here is a diagram of the thermostat location on a Dodge Intrepid 2.7:
[Image of the thermostat location on a Dodge Intrepid 2.7]
