1. Gather Materials and Tools:
- Power door lock and window kits (specifically designed for a 1967 Mustang)
- Wiring harness and connectors
- Power window switches
- Drill and drill bits
- Wire cutters and strippers
- Crimping tool
- Soldering iron and solder
- Voltmeter
- Automotive-grade electrical tape
- Safety glasses and gloves
2. Prepare the Doors:
- Remove the door panels to access the interior of the doors.
- Drill mounting holes for the power door lock actuators and window motors according to the kit's instructions.
3. Install the Actuators and Motors:
- Mount the power door lock actuators and window motors in the designated locations.
- Secure them using the provided mounting hardware.
- Connect the electrical connectors from the actuators and motors to the wiring harness.
4. Run the Wiring Harness:
- Route the wiring harness through the doors and into the vehicle's interior.
- Make sure the wiring is properly secured to prevent rattling or damage.
- Connect the harness to the power window switches.
5. Install the Power Window Switches:
- Choose a suitable location for the power window switches, typically on the door panel or center console.
- Drill holes for the switches and mount them securely.
- Connect the switches to the wiring harness.
6. Connect to Power Source:
- Locate a suitable power source for the door locks and windows, typically the vehicle's fuse box or ignition switch.
- Connect the positive and negative wires from the wiring harness to the power source.
- Use a voltmeter to ensure proper voltage supply.
7. Test the System:
- Once all connections are made, test the operation of the power door locks and windows.
- Use the switches to lock and unlock the doors and raise and lower the windows.
8. Reinstall Door Panels:
- Reinstall the door panels, making sure that all electrical wires and connectors are properly tucked away and not visible.
9. Finalize and Secure:
- Double-check all connections to ensure they are secure and properly insulated.
- Use electrical tape to wrap any exposed wires or connectors to prevent short circuits.
- Test the system one more time to ensure it's functioning correctly.
Note:
This guide provides a general overview, but specific steps may vary depending on the exact power door lock and window kit you purchase. It's important to follow the detailed instructions provided with the kit to ensure a proper installation. If you're not comfortable working with electrical systems, consider seeking professional assistance from an experienced auto electrician or mechanic.
