• Phillips head screwdriver
• Flat head screwdriver
• 1/4 inch socket wrench
• 7/16 inch socket
• Vent window assembly (including frame, glass, and regulator)
• Weather stripping (if needed)
1. Open the door.
2. Remove the vent window trim.
3. Remove the two Phillips head screws that hold the vent window regulator to the door.
4. Remove the vent window regulator from the door.
5. If necessary, remove the old weather stripping from the door frame.
6. Install the new weather stripping (if needed).
7. Place the vent window regulator in the door frame and secure it with the two Phillips head screws.
8. Install the vent window assembly into the door frame.
9. Secure the vent window assembly with the two Phillips head screws.
10. Install the vent window trim.
11. Close the door.
Test the vent window to ensure that it opens and closes smoothly. If the vent window does not open and close properly, you may need to adjust the regulator.
