2. Look for any kink or block on fuel lines.
3. Locate the fuel filter and make sure it is properly installed.
4. Check fuel pressure.
5. Prime the fuel system.
-Turn the ignition switch on and off three times. This will cycle the fuel pump and pressurize the fuel line.
- Try to start the engine
- If the car still doesn't start, repeat the process a few more times.
6. If the car still cranks but doesn’t start, you may need to have a mechanic check the fuel system.
To prime the fuel system after installing a new fuel filter:
- Turn the key to the "On" position, but don't start the engine.
- This will turn on the fuel pump and pressurize the fuel system.
- You should hear the fuel pump running for a few seconds.
-Turn off the key and wait a few minutes.
- Repeat this process a few times.
- Then, try to start the engine.
