Auto >> AutoSPT >  >> Engine

How do you get to the egr value on 1994 Ford Thunderbird 4.6 engine?

1. Locate the EGR valve. It is usually located on the intake manifold, near the throttle body.

2. Disconnect the electrical connector from the EGR valve.

3. Remove the vacuum hose from the EGR valve.

4. Remove the two bolts that hold the EGR valve in place.

5. Pull the EGR valve out of the intake manifold.

6. Use a gasket scraper to remove the old gasket from the intake manifold.

7. Install a new gasket on the intake manifold.

8. Insert the EGR valve into the intake manifold.

9. Install the two bolts that hold the EGR valve in place.

10. Reconnect the vacuum hose to the EGR valve.

11. Reconnect the electrical connector to the EGR valve.

Auto Repair
How do you replace ford e150 mirror? When should you replace the timing belt on a 2007 Chrysler PT Cruiser?
Car Care
How to Choose the Correct Antifreeze: All You Need to Know! 1 Automaker Engineers its Own Premium Audio System Is It Legal to Drive Without Car Insurance?
Engine
What kind of engine oil do you put in a 1994 ford explorer xlt? Check engine light flashing on a 03 ford expedition?
Electric Car
Are EVs cheaper to run than ICE vehicles? How do you change the cabin air filter in a 1989 Chevy silverado? How do you remove the power steering pulley from a 1998 Chevy 12 ton pickup with 350 vortex?
Autopilot
What does the A1 code for 2006 Honda odyssey mean? How do I set the cam on a 4hg1 Isuzu?
Car Photos
What SUVs have the most spacious back seats? Why does your car smell like gas every now and then? How do you download a 2001 Audi S4 TT Quatro Roadster Manual?