1. Disconnect the battery. This is important to prevent any electrical accidents while working on the fan assembly.
2. Remove the fan shroud. This is the plastic housing that surrounds the fan assembly. It is held in place by several bolts that can be removed with a wrench.
3. Disconnect the fan clutch. The fan clutch is located at the center of the fan assembly and is responsible for engaging and disengaging the fan. It is held in place by a few bolts that can be removed with a wrench.
4. Remove the fan assembly. Once the fan clutch is removed, the fan assembly can be pulled off the engine. It may be necessary to use a pry bar to gently pry the fan assembly off if it is stuck.
5. Inspect the fan assembly. Once the fan assembly is removed, inspect it for any damage or wear. The fan blades should be in good condition and the fan clutch should be functioning properly.
6. Reinstall the fan assembly. If the fan assembly is in good condition, it can be reinstalled by following the steps in reverse order. Be sure to tighten all the bolts securely.
7. Reconnect the battery. Once the fan assembly is reinstalled, reconnect the battery.
